CE Digital Electromagnetic Flow Meter For Salt Water Chemical Wastewater Treatment FTMG

1 Set
MOQ
$240.00(>=1 Sets)
가격
CE Digital Electromagnetic Flow Meter For Salt Water Chemical Wastewater Treatment FTMG
풍모 갤러리 제품 설명 따옴표를 요구하십시오
풍모
제품 사양
Warranty: 1 Year
Customized support: OEM
Model Number: FTMG
Type: Variable Area Water Flowmeters
Product name: Electromagnetic flow meter
Diameter nominal: DN3-DN3000
Accuracy: 0.2% / 0.5%
Display type: LCD
Power supply: DC24V/AC220V
Output signal: 4-20mA/RS485/HART
Connection: Flange Clamp Flowmeter
Conductivity: >5 micro Siemens/cm
Ingress protection: IP65/IP68
Electrodes: PTFE
인증: CE
기본 정보
인증: CE
Model Number: FTMG
결제 및 배송 조건
Packaging Details: smaller than DN125, we will use the carton box for CE Digital electromagnetic flow meter for salt water chemical liquid waste treatment. Bigger than DN125, we will use the wooden box or according to customer's requirement.
Supply Ability: 3000 Set/Sets per Month
제품 설명

CE Digital electromagnetic flow meter for salt water chemical liquid waste treatment

Electromagnetic flow meters, or magmeters, are comprised of a transmitter and sensor that together to measure flow. The magnetic flow meter’s sensor is placed inline and measures an induced voltage generated by the fluid as it flows through a pipe. The transmitter takes the voltage generated by the sensor, converts the voltage into a flow measurement and transmits that flow measurement to a control system.

Product Information

CE Digital electromagnetic flow meter for salt water chemical liquid waste treatment

  • Easy Setup
  • Minimal Straight Pipe
  • Forward or Reverse flow and Total
  • IP65,IP67 ,IP68 Rated (optional)
  • 100:1 Turndown
  • Virtually No Pressure Loss
  • No Moving Parts
  • RS485 Standard,HART standard is available.
  • Suitable for Pipes Up to DN3000
  • High Accuracy to 0.2%R .
  • 4 to 20 mA and Frequency Outputs Standard
  • 3-Point Calibration Included

Model

DN6~DN3000mm

Nominal Pressure

0.6~1.6MPa(2.5Mpa/4.0Mpa/6.4Mpa...42Mpa)

Accuracy

±0.5%,±0.3%or±0.2% are available

Liner material

Teflon,PFA,F46,Neoprene,Polyurethane

Electrode Type

General type

Electrode material

Stainless steel SUS316,Hastelloy B, Hastelloy C,Titanium,Tantalum Platinum-iridium,
Stainless steel covered with tungsten carbide

Mediem temperature

Integral type

-20°C~+60°C

Remote type

Neoprene & Polyurethane Liner

-10°C~+80°C

PTFE Liner /PFA Liner /F46 Liner

-10°C~+160°C

Ambient Temperature

-25°C ~+ 60°C

Ambient Humidity

5~100%RH(relative humidity)

Medium Electrical
conductivity

≥5μ s/cm

Measuring Range

1500:1,flow rate<15m/s

Structure type

Integral type,remote type,submersible type,ex-proof type

Protection Class

IP65,IP68(optional)

Ex-proof Mark

ExmdⅡT6

Product Standard

JB/T 9248-1999 Electormagnetic Flowmeter

1, pipe cutting 2, welding flange 3, coil assemble 4, polishing 5,sensor checking 6, paiting 7 transmitter checking 8.qualified products

Calibration is the most important parts of manufacturing the high accuracy flowmeter, As the principle is the same, the material and the structure design of the flowmeter is not much different.High accuracy flowmeters depends on the high accuracy calibration equipment.

Packaging & Shipping

We have carton packing and wooden case packing, before packing, we will make the goods clean. We'll use screws and wire to secure. According to the size of goods to arrange shipment. Will make sure all the goods to your place safely. Here is the weight and dimension table for some flow meters as below.

Related Products

Company Information

Kaifeng Fantai Measurement & Control Technology Co., Ltd. was established in 2008, which is located in Kaifeng, Henan Province,. It is a professional manufacturer of electromagnetic flowmeter, vortex flowmeter, turbine flowmeter and orifice flowmeter.

Our factory covers more than 10000 square meters. It owns 4 patents for product appearance and 8 patents for practical patents. The company has one set standard metrological equipment for calibration with Sartorius scale. Two sets standard flowmeter calibration equipment.

We have CE, ISO, explosion-proof certificates. The company has a strong after-sales team with 15 engineers to ensure that customer site issues are resolved within 24 hours.

Our philosophy is: customer's success is our achievement! A good product is to let customers have no worries!

FAQ

1. How do you calibrate the flowmeter?

We use the reference standard flowmeter method to calibrate the 0.5%R flowmeters.We use the Gravimetric for the 0.2% R flowmeters.

2. How can you gurantee the high accuracy?

The Gravimetric mothod is much more accurate than the volumetric calibration and we use the high accuracy sidorious scale to gurantee the less tolerance. Our high accuracy Sartorius scale can reach the 0.01%.so it is no problem to gurantee the 0.2% accuracy.

3. Can I be your agent?

Of course, yes, we are a developing company, welcome all the friends to be our agents.

Contact Us
Sales Manager: Hellen
Mobile/WhatsApp/WeChat: +8615324990356
Add: Wangxizhuang, South of Kaiqi Road, Nankou, Xiangfu Road, Kaifeng, Henan, CN

추천된 제품
우리와 연락하기
담당자 : Shelly Huang
남은 문자(20/3000)